Guide · Homeowners · 4 min read · Updated 16 November 2026
Renovation Cleaning Checklist: Room by Room After Building Work
Short answer
After a renovation, clean top to bottom and room by room: vacuum dust from ceilings, fittings and high surfaces first, then wipe walls lightly, clean glass and frames, wash doors, switches and radiators, empty and wipe every cupboard, and finish with floors. Kitchens and bathrooms need extra time for paint splashes, grout haze and silicone smears. Plan a lighter second clean a day or two later.
Before you start
Wait until the trades have finished every dusty task, including sanding, cutting and drilling, and ideally until any snags have been fixed. Cleaning while work is still going on is wasted effort. Make sure you have the right equipment: a filtered vacuum, plenty of microfibre cloths, two buckets, a plastic scraper, a step ladder and a pH-neutral cleaner. Open windows for ventilation and wear a dust mask for the first pass.
Clear out loose debris first. Offcuts, packaging, dust sheets and old fixings should be bagged and removed before detailed cleaning begins. Ask your builder whether site waste is included in their price, as it usually should be for renovation work.
Kitchen
Kitchens collect more dust than any other room because of the number of surfaces, and new kitchens need care to avoid scratching fresh finishes.
- Vacuum inside every cupboard, drawer and the tops of wall units before wiping.
- Remove protective film from appliances and doors, then clean off any adhesive left behind.
- Wipe worktops with a damp cloth and the manufacturer's recommended cleaner; avoid abrasives on quartz, laminate and timber.
- Clean the extractor hood, filters and the top of the cooker, where fine dust settles.
- Check behind and under appliances for grit and offcuts.
- Clean tiles and splashbacks, removing grout haze with a suitable cleaner.
- Run the sink and dishwasher empty to clear any debris from the pipes.
Bathrooms and en-suites
Bathroom renovations leave grout haze on tiles, silicone smears on baths and screens, and plaster or adhesive splashes on sanitaryware. Use a plastic scraper, never a metal one, on enamel, acrylic or chrome. A gentle bathroom cleaner deals with most residue, but check product labels before using anything on natural stone tiles, which can be etched by acidic cleaners.
Do not use the shower or bath heavily until the silicone has fully cured, which is usually at least 24 hours and sometimes longer. Wipe the inside of the extractor fan cover, which tends to fill with dust, and run the fan to clear the duct.
Living rooms, bedrooms and hallways
Work top to bottom in each room: light fittings and coving, tops of doors and frames, curtain poles, walls, window frames and glass, radiators, switches and sockets, skirting boards, then floors. Fresh emulsion is easily marked, so use a dry microfibre mop or a very lightly damp cloth on walls rather than scrubbing.
Carpets and soft furnishings hold a surprising amount of fine dust. Vacuum slowly in two directions with a good vacuum. If carpets were in place during the work, a hot water extraction clean afterwards removes dust trapped deep in the pile; guide prices start around £35 per room as an add-on.
Hallways and stairs act as the main route for trades and materials. Check the stair spindles, handrail and the edges of each tread, and wipe the front door and its frame, which often carry handprints and scuffs from deliveries.
Floors: the last job, done properly
Floors come last because everything you clean above them drops dust onto them. Start by vacuuming slowly with a filtered vacuum, going along the edges and into corners with a crevice tool, as this is where fine dust collects against the skirting. On hard floors, vacuum before any mopping; if you mop first, the dust turns into a paste that spreads and dries as a white film.
Use the cleaner recommended by the flooring manufacturer. New laminate and engineered wood should only be cleaned with a well wrung-out mop, as standing water can swell the joints. Natural stone such as limestone and slate needs a pH-neutral stone cleaner, never vinegar or bleach. Luxury vinyl tiles cope well with a damp mop and mild detergent. Rinse with clean water if a haze appears when the floor dries.
Check for adhesive, paint drips and plaster splashes on the surface. Most will lift with a plastic scraper and a little warm water. If anything does not come off easily, stop and check with the fitter before using solvents, which can damage some finishes.
The details people often miss
These small areas are where a clean looks unfinished if they are skipped. They take time but make a large difference to how fresh the house feels.
| Area | What collects there | How to deal with it |
|---|---|---|
| Radiators | Dust between the fins and behind the panel | Radiator brush and vacuum, then wipe |
| Window tracks | Grit and plaster crumbs | Vacuum with a crevice tool, then damp cloth |
| Light switches and sockets | Paint spots and dust | Power off, wipe with a barely damp cloth |
| Door hinges and handles | Paint and dust | Plastic scraper, then polish |
| Ventilation grilles | Fine dust blown into the vents | Vacuum with a brush attachment |
| Loft hatch and edges | Dust falling from the loft | Vacuum around and above the hatch |
The second pass and when to get help
A day or two after the main clean, go round again with a damp cloth on the surfaces you use most, and vacuum floors again. Fine dust will have settled out of the air and dropped from fittings. This second, lighter clean is what makes the difference between a home that still feels dusty and one that feels finished.
A whole-house renovation clean is a big job. Professional guide prices are around £380–£600 for a three-bedroom house, £150–£250 for a kitchen refit clean and £100–£180 after a bathroom renovation. A team brings dust extractors and enough people to finish most homes in a day, which matters if you are moving back in or furniture is arriving.
Questions people also ask
How soon after a renovation should I clean?
Clean once all the dusty work has stopped, including any snag repairs that involve sanding or drilling. If you clean too early, trades will undo your work. Plan a thorough first clean as soon as the builders leave, then a lighter second clean one or two days later to catch dust that settles out of the air.
Should I clean walls after decorating?
Only lightly. Fresh emulsion can take a couple of weeks to cure fully and is easy to mark. Use a soft brush on a vacuum or a dry microfibre mop to lift dust, and spot-clean marks with a barely damp cloth. Avoid scrubbing, which can leave shiny patches.
What does a professional renovation clean cost?
Typical guide prices start from about £120 for a single room, £150–£250 for a kitchen refit, £100–£180 for a bathroom and £380–£600 for a whole three-bedroom house. An interim clean between stages starts from around £90. Your fixed price depends on the size of the home and how much dust and residue there is.
Written and checked by the Renovation Cleaning team. Read our editorial policy.
More guides
How Much Does Renovation Cleaning Cost in the UK?
Renovation cleaning in the UK starts from about £120 for a single redecorated room. A kitchen refit clean typically costs £150–£250, a bathroom…
How to Clean Up Dust After a Renovation: A Step-by-Step Guide
To clean renovation dust, ventilate the room, vacuum from the ceiling down using a vacuum with a HEPA or fine dust filter, then damp wipe every…
Living in Your Home During a Renovation: How to Control Dust
To live comfortably through a renovation, seal off the work area with dust sheets, zip doors or taped polythene, keep a clear walkway from the…
Lead Paint and Asbestos Dust After Renovation: What to Know
In UK homes built before the 1970s, old paint may contain lead, and dry sanding it creates hazardous dust that should be cleaned with wet methods and…
Renovation Cleaning vs Builders Clean: Which Do You Need?
A builders clean prepares an empty new build or refurbished property for handover, focusing on construction dust, residue, films and glass.…
Interim Cleans During a Renovation: Are They Worth It?
An interim clean is a quick clean between stages of a renovation, for example after first fix and plastering but before decorating or flooring. It…
Get a free renovation cleaning quote
Tell us what you need and we'll come back with a clear price.
Request a quote